加工定制是	品牌豫正
型号QD	起重机类型双梁起重机
操作形式空操、地操、遥控	结构形式包厢
跨度12-30米	有效起升高度6米9米12米米
额定起重量20、32、50、100吨	大车运行速度37.2m/min

qd型5~50/10吨吊钩桥式起重机
个车点
室内用个车影品点
si
s15
28b0
1、qd型吊钩桥式起重机,主要由桥架、大车运行机构、小车、电器设备等组成。根据利用等级和载荷状态不同,分为a5、a6二种工作级别。
2,司机室平台入口方向分側面入口,端面入口和顶面入口三种,图示为侧面入口,箭箭头a所示为端面入口,没有门为顶面入口。
说明
4、大车导电可用安全滑触线也可用角钢,既可在司机室对侧(如图)也可在司机室同側。
3、本图万示
为司机室在左端安装
5、该起重机动作操纵全部在司机室內完成。
6、ho为大车缓冲器增加的高度,h0≤250
/1ot overhead crane with hook is mainly composed of bridge, running gear of crane, trolley and electrical device,
etc. it is divided into two working classes: a5 and a6 according to the use grade and load-up condition
2. there are three kinds of method for entering the platform of cab: from the side, from the end and from the top. the figure is the
explanation
1. qd model 5-50
side entrance: arrowhead shows the end entrance; the top entrance is at the place there is no door
4. safe slide wire or angle iron can be used for electric conduction of the crane; it can be either at the opposite side of the cab(same
3. the figure shows that the cab is mounted at the left end
as the figure) or at the sameside of the cab
s operation of the crane shall be finished in the cab completely.
s the in creased height of buffer of the crane. ho 250.

---

豫正重工集团有限公司
赵女士
18568551951
河南 新乡 长垣县