- 加工定制:是
- 型号:YJ768独立供气高密度喷气织机
- 品牌:永佳
- 针叶截面形状:
- 针尖形状:
- 工艺形式:
- 锡林直径:
- 总功率:
- 针刺行程:
- 针刺频率:
- 植针密度:
- 有效机幅:
- 产地:
- 种类:
- 应用领域:
- 规格:独立供气
联系电话:13969721932
联系人:宫女士
qq:416331462
微信:jie121328
本机型是根据客户要求,在织机两侧加装独立气泵,采用电子储纬,主辅喷嘴与异性筘结合(不用电磁阀控制引纬),由多组气泵按角度调节喷射时间,通过连续喷射达到引纬目的,该机型采用四连杆打纬,机械式送经,机械卷取。开口机构采用曲柄开口或凸轮开口,可织密度较高的人棉、全棉、化纤等一些中档织物,节能可达50%以上。
product introduction:
this machine is according to customer requirements, on both sides of the loom equipped with independent air pump, electronic weft, advocate complementary nozzle with the opposite sex reedelectromagnetic valve to control the weft insertion (don\'t), by the angle adjustment by multiple sets of pump discharge time, through the continuous injection to achieve weft insertion, the aircraftused 4-linkage beating-up, mechanical one, mechanical winding.shedding mechanism with the crank openings or cam shedding, can weave density higher rayon, cotton, chemical fiber, and othermiddle-grade fabric, energy saving can reach more than 50%..
技术参数:
供气方式
独立供气
筘幅
150cm,190cm
选纬
电子一体化单喷
动力
马达2.8kw
转速
360-420转\\分
引纬
主辅喷嘴、结合异形钢筘
开口
曲柄式或凸轮式
送经
机械式送经
卷取
机械式卷取
绞边
行星齿轮方式
剪刀
机械式
technical parameters:
supply mode
independent type gas
reed width
150cm 190cm
weft
electronic integration of single nozzle
power
motor 2.8kw
speed
360-420rpm
weft insertion
main and auxiliary nozzle,combined with a profiled reed
opening
crank or cam
off
the mechanical left off
coiling
mechanical winding
undercut
gear mode
scissors
mechanical
\';
青岛永佳纺织机械制造有限公司
管昭君
15966819183
山东黄岛区(原胶南市)王台镇河南薛村