smart universal battery charger
this charger is designed for portable, flexible and multi types of battery.it can detect the battery type and charge thebattery automaticallyunder your selected charging current. built-in led indicators to display the charging status and 5v/100mah usb output function
user manual
1.  warming:
this charge is onlyfor charging cylindrical li-ion (3.7v, 3.8v), ni-mh/ni-cd,lifepo4(li-ion) batteries.
please readthis instruction before use; pay attention to the recommended chargingcurrent, never select improper charging current
whencharge with 5v usbacadapter, 2a-current ac adapter is recommended
the chargerma gethot during working a long time, handle withcare!
please cut off theelectricity and remove the battery from the charger when charging complete.
indoor conditiononly!!
the displaying data ofthe charger is only for reference; please refer to professional test instruments if you need accurate data
2. feature and specification:
micro usb dc 5v input,two independent slots and charging channels with built-inmicro-computer management system to ensure the high efficiency
two chargingcurrentoptions (0.5a/1.0a)
four led indicators shows the charging status (25%, 50%, 75%, 100%) and also shows the battery type when insert into battery (1.2v ni-mh , 3.2vli-fe, 3.7v li-ion, 3.85v li-ion)
identify li-ion and ni-mhautomatically; but, you need to adjust the charge mode for lifepo4 and 3.85v li-ion battery
it can active 0vrechargeable battery but the charger don’t charge 1.65v~1.85v battery types.
buit withover-charging protection, over-discharging protection and polar reverse protection.also, it can identifybroken battery.
charingmode:instant currentand voltage.
dc inputcharging: working power source at 5v-2a (micro plug)
standardautomatical 5v/1000mah usb outputport
3.  select button, led and function.
mode button:
press the button toselect the battery type when insert into a battery. it begin to charge the battery after fixing the battery type (please noted that it identify li-ion and ni-mh automatically, don’t need to selectmanually)
press the button and holdit for 2 seconds whenever after connection to power, it can switch the charging current between 0.5a and 1.0a;
led indicator
connect the charger topower, all  led indicators will be on, when no battery insertafter5 seconds, led indicators will be off except the 0.5a currentindictor
when battery is insertedinto the charger, 4 led indictors will be on and 3.7v led indictors flicker, then, please click themode button to fix the correct batterytype.  it will begin to charge the battery 5 seconds later, and the led indictors will show the charging status.
pressthemode button to show the battery type( 5 seconds ) during charging and return to show the charging status
it can shows the battery’s remainingpower when put battery into the charger ( no connection with charging power)
usb output indictor: whenusb output is detected, the battery volume indictors will be on for 10 seconds and then off, click the button to show the battery’s volume rate.
4.  specification:
input: micro usb dc5v/2a
output: 1.4v , 4.2v±0.05v, 3.65±0.05v , 4.35±0.05v
output current:500/1000mah
constant voltagecharging, cutoff current:
standbycurrent:
5.  usb output function
usb output no-loadvoltage: 4.90v-5.30v
output current: 1000mah(1a)
no-load current:
the output voltage is4.75v-5.25v when current is 1000mah
output protectionvoltage: 3.0±0.1v
6.  compatibility
li-ion/imr: 18650, 18490,18350, 17670, 17500, 16340(rcr123), 14500, 10440
7.  size
112mm× 60mm×30mm/ 86grams+ 15gram usb cable
design and made in china
contact distributor for moreinformation or support
使用说明书
警告
此充电器只可以充圆柱锂离子电池(3.7v,3.8v)，镍氢/镍镉、磷酸铁锂电池
在使用前，请认真参考说明书,注意充电电池的推荐充电电流,不要超过推荐电流充电
使用5vusb适配器充电(适配器电流建议2a)
充电器充放电时可能会发热,注意不要烫伤
停止使用时,请拔掉电源，拔除电池
只可以在正常室内使用
此产品检测数据仅供参考，实际情况请参照专业仪器
充电器要求及功能:
采用micro usb dc5v输入,两槽独立充电及微电脑管理系统 
可供2种充电电流选择 (500ma/1000ma)
led显示充电状态25%  50%  75% 100%和电池类型nimh 1.2v li-fe 3.2v li-ion 3.7v li-ion 3.85v.
可自动识别锂电(li-ion)电池及镍氢(ni-mh)电池，手动选择磷酸铁理(liepo4) 和li-ion3.85v电池
有0v电压激活功能,1.65-1.85v不能充电(但会有激活电流涓流型式充电)。
有过充过放，短路，智能识别坏电池及反接电池检测保护。
充电模式，恒流恒压
采用dc输入,充电器工作电源为5v-2a  (micro插头)
带标准5v/1000ma usb自动识别输出功能,（只有右边一槽可以usb 5v输出）
按键、led及功能的描述
按键：在通电情况下，任何时候按住选择键保持 2秒钟互相转换500ma1000ma充电电流；通电对电池充电的时候，轻按选择键改变充电电池类型，当选定需要充电电池类型时（例3.20v  3.85v）5秒钟进入充电状态。
led：充电器接上5v电源, 充电器所有的 led瞬间全亮,如果电池未放入充电槽, 500ma （led）指示灯常亮, 其他灯熄灭；
当检测有电池时，4个led灯全亮，3.7led灯会闪烁，此时可轻按按键选择所需要充电的电池类型，如果不选择，5秒后进入默认识别的电池进行充电，此时充电指示灯按照对应电量比率闪烁。轻按按键可查询充电类型（不作电量指示）5秒后返回充电状态。不通电时，装入电池可查看电量比率（5秒后熄灭，需要查看再次按下）
usb输出指示：当检测到usb输出时，电量指示灯亮起10秒后熄灭，按键可查看电量。
电气技术参数：
输入电源：micro usb dc 5v/2a
输出电压: 1.42v
4.2v±0.05v,
3.65±0.05v
4.35±0.05v
输出电流: 500ma/1000ma
恒压充电，截止电流：
外接电源待机电流：
usb输出功能：
usb端口输出空载电压：4.90-5.30v;
输出电流：1000 m a;
空载电流:
负载1000m a电流时，其端口输出电压：4.75-5.25v;
停止输出保护电压：3.0±0.1v；
兼容电池:
li-ion / imr: 18650, 18490, 18350, 17670, 17500,16340(rcr123), 14500, 10440
充电器尺寸: 
长x宽x高: 112mmx 60mmx30mm
重量: 86+15g（usb 充电线）
获取更多资讯请联系您的经销商

---

深圳市鑫盛力电源有限公司
张妮
13760394452
广东深圳市龙华新区观澜君龙社区凌屋工业园8号茂邦工业园1栋6楼