长沙分类信息网-长沙新闻网

美国进口BI 93PR10K可调电阻 黑色直插电位器定位器

2021-8-9 21:49:41发布12次查看
  • 加工定制:是
  • 品牌:其他
  • 型号:93PR10K
  • 种类:单圈
  • 材料:碳膜
  • 性能:功率
  • 提供加工定制:是
  • 用途:普通
  • 阻值调节方式:旋转式
  • 阻值变化方式:X式(直线式)
  • 标称阻值:
  • 额定功率:0.025
  • 阻值允许偏差:±0.002
  • 滑动噪声:13
  • 分辨率:22
  • 零位电阻:3
  • 接触电阻:4
  • 绝缘电阻:1
  • 符合度:100

可调电阻93pr电位器是怎么使用?怎么样接线?工作电压多大?
93pr技术资料
电器特性(electrical)
标称阻值范围(standard resistance range, ohms)..................20 to 2meg
标准电阻误差(standard resistance tolerance)...................±10%(最大输入电压(input voltage, maximum).........................200 vdc or rms not to exceed power rating
最大滑动器电流(slider current, maximum).....................100ma or within rated power, whichever is less
额定功率(power rating, watts)..................................1.0 at 70°c, derating to 0 at 125°c
最大零位阻值(end resistance, maximum).............................2 ohms
表面实际电气机械行程(actual electrical travel, turns,nominal)...........270°
绝缘强度(dielectric strength).....................................900vrms
最小绝缘电阻(insulation resistance, minimum)...................1,000 megohms
分辨率(resolution).............................................本质上无限(essentially infinite)
最大接触电阻变化(contact resistance variation, maximum)..........1% or 1 ohms, whichever is greater
环境特性:(environmental)
seal ..........................................................85°c fluorinert (no leaks)
电阻温度系数(temperature coefficient, maximum) ...............±100ppm/°c
工作温度范围(operating temperature range) .................–55°c to +125°c
热冲击(thermal shock ).....................................5 cycles, –55°c to +125°c (1% δrt, 1% δvr)
抗潮性(moisture resistance) ..............................ten 24 hour cycles (1% δrt, ir 100 megohms min.)
冲击测量(shock, 6ms sawtooth) .............................100g’s (1% δrt, 1% δvr)
振动测量(vibration) ....................................20g’s, 10 to 2,000 hz (1% δrt, 1% δvr)
最高温度(high temperature exposure) ..................250 hours at 125°c (2% δrt, 2% δvr)
旋转寿命(rotational life) ............................200 cycles (3% δrt)
负荷寿命(load life at 0.5 watts) ....................1,000 hours at 70°c (2% δrt)
承受焊接高温(resistance to solder heat) .....................260°c for 10 sec. (1% δrt)
机械原理:(mechanical)
机械制动(mechanical stop)................................24 oz.-in.
stop strength........................................... 1.5 lb.-in. (0.169 n-m)
开动后最大扭转力(torque, starting maximum).............5 oz.-in. (0.035 n-m)
名义重量(weight, nominal) .。。。。。。。。。。。。。  .05 oz. (1.5 grams)

深圳市博恩斯科技有限公司
曹小姐
13714882106
华强北街道华富路南光大厦1210
该用户其它信息

推荐信息

长沙分类信息网-长沙新闻网
关于本站