高纯度石墨增碳剂  98%碳含量石墨化增碳剂 炉内增炭2-4mm增碳
固定碳
≥98.5%
灰分
≤0.5%
挥发分
≤0.5%
硫
≤0.05%
水分
≤0.5%
氮
≤0.03%（300ppm）
石墨化增碳剂产品使用方法：在电炉底部放置炉料三分之一后将计算好的产品放置在
炉料上，（炉中放一部分料后放增碳剂）然后把剩余炉料按要求放在上面，如上面的炉料
较大时应把一些较碎的炉料压在增碳剂上，以防止漂浮影响吸收率。增碳剂加入量是金属
量的1-3%，用户也可根据产品生产质量要求自行调整。增碳剂的特点是碳在铁液中吸收
效果好，不返渣，使用增碳剂可大幅度降低铸件生产成本。
product overview:
chifeng city bi source activated carbon factory producing graphite carbon agent, with a high degree of graphitization, low sulfur, low ash, low nitrogen, high contentof carbon content, absorption rate is high and fast, elemental carbon in the casting microstructure most to a type graphite appeared, fine, uniform
graphite, which can promote the formation and the process of the ball, effectively improve the iron graphite system and reduce the production of iron and carbon.graphite carburant is an additive used in steelmaking, it is essential to producing high quality steel material. in addition, the production of electrode paste.
product features:
1, high fixed carbon, high absorption rate, low sulfur, low nitrogen and in the absorption speed faster than similar graphitecarburant, and adsorption of furnace wall, fully absorb the residue free, the price is lower than the similar sulfur is less than 0.05 following the graphitized carbon agent, the highestprice.
2, the absorption rate is high, according to the method of using the highest rate of 90%.
3 absorption speed, faster than similar graphite carburant absorption rate, adsorption of furnace wall and no residue,furnace carbon absorption speed advantage is more obvious.
4, the low sulfur, 0.05% the following, the lowest 0.02%. nitrogen was low, 100ppm.
5, the high cost, in the similar graphitization recarburizer (sulfur in the highest price is less than or equal to0.05).
product use:
graphitization recarburizer product usage: 1/3 in furnace bottom placed charge will be calculated after the product is placed in the
(charge, put part of the material after the furnace put recarburizer) and then put the remaining charge on it according to the requirements, such as the above charge
large should put some more crushing burden of pressure on the carburant, to prevent the floating effect absorption rate. carbon agent added metal
the amount of 1-3%, the user can also be adjusted according to product quality requirements. recarburizer is characteristic of carbon in liquid iron absorption
the effect is good, do not return slag, can greatly reduce the production cost of castings using recarburizer.
赤峰市碧源活性炭厂
厂   址：内蒙古赤峰宁城县天义镇富家路东侧西环路西侧
      联系人：许琳
      手   机：15047256441
      q   q ：2872759227
      邮   箱：2872759227@qq.com
      网   址：
';

---

赤峰市碧源活性炭厂
许雪平
15047256441
内蒙古宁城县天义镇富家路东侧西环路西侧（原糖厂南侧）