产品概述product overview
把多台自动绕线包胶一体机和一台自动焊锡机组成一条流水生产线。设备之间通过输送皮带线自动把前一工位的产品流向下一工位，使整个生产线按照同一个节拍时间生产。组线生产适用于变压器线圈的大批量、高效率绕线焊锡生产。
the multi-stationautomatic winding machine plastic coating machine and an automaticsoldering machine composed of a production line. between devicesthrough the conveyor belt line automatically before a stationproducts to the next station, the entire production line inaccordance with a production cycle times. set of lines for theproduction of large quantities of transformer coils, highefficiency solder wire production.
───────────────────────────────────────
与全自动流水线（带振动盘）的对比
with automatic assembly line (withvibration plate) contrast
◆ 生产灵活，方便切换机种，可以根据不同数量绕组组建生产线。
production of flexible andconvenient switching machine models, can vary according to thenumber of windings form a production line.
◆ 成本比全自动流水线（带振动盘）低。
cost ratio automatic assembly line(with vibration plate) low.
◆ 对骨架、漆包线、胶带等物料一致性要求低。
on the skeleton,wire, tape, and other materials that require lowconsistency.
◆ 单机之间有一定数量的备料，如果某台设备出现员工离岗、缺料或设备故障等情况，生产线不会停止。
alone among acertain number of spares, if a piece of equipment employeesundergo, lack of material or equipment failure, etc., theproduction line does not stop.
───────────────────────────────────────
适用线圈scope
高频变压器、低频变压器、开关电源线圈等各种变压器。
high-frequency transformers, lowfrequency transformers, switching power
transformer coils and other.
───────────────────────────────────────
设备特点equipmentfeatures
◆ 设备核心标准件全部采用进口高品质元器件。
corestandard equipment all imported high-qualitycomponents.
◆ 主体全部采用铸铁精密加工制作，单机重量820kg保证设备稳定、高速、长期运行。allthe main production precision machining cast iron, single weight820kg ensure equipment stability, high-speed,long-running.
◆ 设备的主轴夹具采用快速更换结构，不需要拆卸螺丝即可更换机种。
equipment with fast replacementspindle clamp structure can be replaced without removing the screwmachine models.
◆ 搭载艾森独创的多轴板式包胶结构，彻底解决市面上起绕绕不上、包偏等不良现象。
ascendoriginal plate equipped with plastic bag multiaxial structure,solve from around the wound is not on the market, includingmigraine and other undesirable phenomena.
◆ 可安装200米的大卷胶带，大大降低更换胶带的频率。
roll of 200meters can be installed tape, greatly reducing the frequency ofreplacing tape.
◆ 多台设备用皮带线连接，不需要人工周转。
multipledevices to connect with the belt line, without artificialturnover.
───────────────────────────────────────
规格参数specifications
型号 model
rb6908-bs/ra10008-bs
rb4512-bs
主轴数number of spindles
8
12
主轴最高转速(rpm)
the max.speed ofspindles
10000
主轴间距(mm)spindlepitch
69/100
45
主轴伺服马达功率(w)
servo motor power
1000
最大骨架外径(mm)
max. external diameter ofskeleton
34
22
上下料方式loading method
自动上下料，皮带线传送automatic loading andunloading,transmission belt line
控制系统control system
可编程序控制器，支持多轴插补运算programmablelogic controller, support for multi-spindle interpolationoperation
人机界面man-machine interface
7寸彩色触摸屏7-inch color touchscreen
快速夹具接口内径（mm）
fast fixture interface insidediameter
10
适用线径(mm)applicablewire
0.03～0.4(追加气动剪刀可达0.8)
0.03～0.4(additionalpneumatic scissors can be up to 0.8)
xyz轴移动距离(mm)
xyz spindle distance
x：100  y：140  z：110
xyz轴最高移动速度(mm/sec)
xyzspindle max.speed
260
包胶宽度规格(mm)
tape windingspecifications
窄带包胶结构1-10
narrowband encapsulated structure1-10
标准包胶结构5-15
standard encapsulated structure5-15
包胶带宽度变更时需要更换包胶夹具
need to replace the plastic bagfixture when the package tape width changes
电源规格(v)
powersupply specifications
ac 220v±10%，50hz/60hz
功率(w)power
1500
气源规格(mpa)airspecifications
0.5～0.7
设备外形尺寸(mm)
device dimensions
1000(w)*1150(d)*1550(h)
重量(kg)weight
820

---

珠海市艾森科技有限公司
黄先生
13631228186
中国 广东 珠海市南屏科技工业园屏西八路2号B栋一楼