| 流量2.6-10.3KW | 转速1440 |
| 型号ETS6-10-14,ETS6-18 | 品牌Danfoss/丹佛斯 |
| 材质电子膨胀阀 | 订货号034G5010 |
| 货号034G5024 | 连接形式焊接 |
| 压力环境常压 | 工作温度常温 |
| 标准美标 | 流动方向单向 |
| 驱动方式电子 | 零部件及配件阀体 |
| 用途节流 | 类型(通道位置)直角式 |
| 适用介质氟利昂 | 规格ETS6-10,ETS6-14,ETS6-18 |
| 是否跨境货源否 |
丹佛斯ets6-10-14,ets6-18,034g5010型小型角型电子膨胀阀的产品介绍
产品描述
the range of electronic expansion valves are
based on many years of experience.
ets 6 secure reliability and provide a precise
solutions for ex pansion and flow control
in a wide range of refrigeration and air
conditioning systems.
compact and lightweight. the current range
is available with a wide capacity range, and
can be used with all common fluorinated
refrigerants. bi-flow operation is also possible
for heat pump systems.
the valve operation is by means of a uni-polar
motor, which can be controlled by a number
of controllers from danfoss or third party
vendors.
with an ekd 316 and eim 336 (current drivers)
and an aks sensor, an accuracy better than
+/-0.5 k can be obtained.
please contact danfoss for more details.
丹佛斯ets6-10-14,ets6-18,034g5010型小型角型电子膨胀阀的产品特点
产品特点：? optimized energy efficiency of the system.
? precision flow control with high resolution.
? compact and lightweight.
? energy saving design.
? proven know-how and high reliability.
? wide range for all common refrigerants.
? bi-flow for heat pump applications.
丹佛斯ets6-10-14,ets6-18,034g5010型小型角型电子膨胀阀的参数
技术参数：
maximum working pressure 47 bar (667 psig)
compatible refrigerants r134a, r404a, r407c, r410a, r22 and other refrigerant
refrigerant oil all mineral oils and ester oils (to lubricate ets 6 valve)
ambient temperature -30°c to 70°c (-22 °f to 158° f)
fluid temperature -30°c to 70°c (-22 °f to 158° f)
durability
tested for 60 million total pulses supplies to the valve during partially open
valve, which is comparable to 150,000 cycles if the valve is operated between
100 to 300 pulses open.
tested for 30,000 full stroke cycles including 20 pulse overdrive at each closing.
ambient humidity 95% rh or less
modulation permanent magnet type direct operating stepper motor
excitation method 1-2 phase
electrical connection jst xhp-6 and jst xhp-5
excitation speed min. 30 pps (pulses per second) to max. 90 pps, recommended 31.3 pps
operating range
0 to 480 pulses, no holding power required (note: do not apply more than
520 pulses)
full motion transit time e.g. 16 sec @ 30 pps, 6 sec @ 80 pps
installation position
liquid line solenoid valve
with coil on the upper side and the valve/coil assembly within ±15?of the
vertical axis
if using a liquid line solenoid valve, it must be installed in such a way that it
does not create liquid hammering this ets 6 valve
max. coil winding temperature 115 °c (239 ° f)
广州思卓贸易有限公司
柯先生
13312878010
广东 广州 白云区 机场路111号建发广场3FA1A