| 品牌中性 | 型号HF014A |
| 货源类别现货 | 类型游戏高清转换 |
| 支持系统Windows 7 | 分辨率1080P |
| 远程唤醒不支持远程唤醒 | 电源管理不支持电源管理 |
| 用途视频转换输出 | OEM可OEM |
| 加工方式工厂生产 | 最快出货时间1-3天 |
| 售后服务质保120天 | 颜色白色 |
| 接口Wii,HDMI |
产品简介：
wii可以输出hdmi的480p信号，直连显示器的神器！还能让wii直连电脑音箱和耳机，无需电源和usb供电，即插即用。这么多功能仍然保持小巧精细的外形，仅有u盘大小!wii 2 hdmi配上一条随处可买的hdmi或dvi线就可以直插显示器（hdmi,或dvi）!注意的是之前早期的视频转换器都是连接到显示器的vga模拟界面，wii2hdmi连接的则是无损数字的hdmi或dvi界面！清晰度，亮度，税利度自然不可同日而语。令显示器也要以物尽其用地享受高清wii画面!
wii可以输出hdmi的1080p信号，直连显示器的神器！还能让wii直连电脑音箱和耳机，无需电源和usb供电，即插即用。这么多功能仍然保持小巧精细的外形，仅有u盘大小!
wii 2 hdmi配上一条随处可买的hdmi或dvi线就可以直插显示器（hdmi,或dvi）!注意的是之前早期的视频转换器都是连接到显示器的vga模拟界面，wii2hdmi连接的则是无损数字的hdmi或dvi界面！清晰度，亮度，税利度自然不可同日而语。令显示器也要以物尽其用地享受高清wii画面!
产品特点
1.为wii增加hdmi输出
2.画面支持高清720p和1080p输出
3.无损直连显示器
4.直接电脑音箱和耳机
5.不需任何周边供电
6.外形精巧细致
7.可以和即将问世的wii2主机画面相媲美
introduction
wii2hdmi, a converter for the wii console, outputs video and audio in full digital
hdmi 720p or 1080p format and supports all wii display modes (ntsc 480i 480p,
pal; 576i) with just one hdmi cable, plug and play for true-to-life video/audio
effects on your hdtv/monitor.
features
video and audio in full digital hdmi format, no transmission loss!
supports all wii display modes (ntsc 480i 480p, pal 576i)
hdmi upscale to 720p or 1080p high definition output
provides advanced signal processing with great precision colors, resolutions!
high quality, state of the art motion adaptive de-interlacing for 480i; 576i input.
no power adaptor, no messy cords—just one hdmi cable.
hassle free! plug and play as you go.
specification
dimensions: 34 x 76 x 14 mm
weight: 15g
power consumption: below 2w
supported video input mode: includes all the display modes of the wii console (480i, 480p, 576i)
supported hdmi output mode:720p@60hz, 1080p@60hz
input connector: wii av multi out plug x 1
output connectors:hdmi connector x 1;3.5mm stereo audio jack x 1
setups for connecting to a tv/monitor with hdmi input
1. make sure that the wii console is powered off. then insert the av multi out plug of the wii2hdmi into the av multi out connector in the back of the wii console.
2. plug one end of the hdmi cable into the wii2hdmi hdmi output, and plug the other end to the hdmi input on the tv/monitor.
3. turn on the tv/monitor and switch the video input of the tv to match the hdmi
input connector used by the wii2hdmi. then you should be able to see the wii screen after you turn on the wii console.
note: in order to obtain the best display quality, we strongly recommend that you set the wii video output to 480p mode (progressive mode). for more details, please refer to the “set the wii video output to 480p mode” section.
set the wii video output to 480p mode
under 480p mode, the image data is double what it is under the 480i mode. therefore,the 480p mode can provide you with much better display quality. in addition, as long as your tv/monitor has hdmi input, it is technically compelled to support the 480p mode; and even though most of the tvs/monitors support the 480i mode, it is not the usual standard. in conclusion, 480p is a better mode for higher display quality, as well as a better solution to avoid compatibility problems with tvs/monitors. therefore, we
strongly recommend that when you use the wii2hdmi, you set the wii video output to 480p mode. the detailed setups are as follows:
1. make sure that the wii console is powered off and that no disc is in the tray.
2. power on the wii console to reach the wii channel menu. then, click on the "wii"
button on the lower lefthand side.
3. on the next screen, select the “wii settings” on the right-hand side.
4. from the “wii system settings 1” screen, select the “screen” button.
5. from the “screen” screen, select the “tv resolution” button.
6. from the “tv resolution” screen, select the “edtv or hdtv (480p)” button, and
click the "confirm" button on the lower righthand side. at this point, you should have
successfully set your wii video output to 480p mode.
深圳市伊凌科技有限公司
赖先生
13590117835
广东 深圳 龙岗区 坂田