加工定制否	品牌Stanford/斯坦福
型号DSE6020 MKII IL-NT MRS16	产品认证CE

using proconx esepro with woodward controllers 
introduction 
the gateway proconx esepro allows scada systems, plc’s and visualization panels to communicate over profibus with one or more woodward controllers. the woodward control interacts as profibus dp device within the profibus system. this application note describes several use cases. 
about proconx esepro 
the esepro (woodward p/n #8445-1046), designed and manufactured by proconx pty. ltd. is a profibus gateway specifically designed to interface woodward’s genset controllers and ats controllers with profibus dp networks. the gateway features a can and a profibus dp port and can be mounted on a din rail. on the can side it implements the canopen protocol to connect to the woodward controls. on profibus side it implements a profibus slave station and accepts connections from profibus master devices like plcs or scada systems. please see product documentation from proconx for more details. 
benefits using proconx esepro with woodward controllers 
the esepro can be used with easygen3000, easygen2000, easygen1000, dtsc-200 and ls5. one esepro can communicate with up to 8 woodward units connected on can bus. the esepro is a dedicated product for ww devices and needs no individual adaptation. this saves setup time. the esepro appears as a modular i/o module in the profibus configuration tool, like simatic manager of siemens.  
the esepro added to the can network makes the according visualization data of connected woodward canopen controls available without adding additional load to the can bus communication. the visualization data is buffered in the esepro gateway which decouples profibus’ cyclic process i/o from the canopen cyclic tpdo transfers.in addition read and write access to device parameter ids is possible utilising canopen sdo transfers.

---

汕头市中南电子科技有限公司
廖先生
13556343315
广东 汕头 龙湖区 广东省汕头市金砂路92号嘉信大夏