el-p3020/3040透明導電油墨 [1] physical properties active chemical: conductive polymer colour: dark blue binder: thermoplastic polymer solid content 1,4 wt% (el-p3020) - 3,4 wt% (el-p3040) viscosity atshear rate of 0,2 /sec: reading out after 2 minutes >8000 pa.sec shelf life: 12 months, in sealed container, when stored between +5°c and +25°c [2] cured characteristics cured characteristics: seegraph visual light transmission (color = transparent blue) : see graph [2] cured characteristics cured characteristics: see graph visual light transmission (color = transparent blue) : see graph [3]processing recommendations: - orgacon el-p ink is ready to use. do not stir to avoid air entrapment. - use monofilament polyester 20 – 180 t/cm. stainless steel mesh is not recommended. - usesolvent-resistant photoemulsion 20 – 40 μm and 70+ durometer polyurethane squeegee. - theoretical coverage: 500 to 1000 cm2/g (20 to 10 μm wet thickness depending on mesh count used - open time onscreen: > 2 h. - cure in oven or belt dryer for 2-3 min at 120°c. for low-temperature substrates, the ink can be cured at 80°c for 10 min. optimum cure schedule should be determined for differentequipment and processing techniques. using the highest possible temperatures and drying times ensures good adhesion and electrical properties. - for printing on glass with el-p3020 , post curing at180 c for 20 minutes leads to improved hardness and scratch resistance of printed ink. - ink is ready to use, and does not require dilution. - clean up with water, ipa, vl screen wash or similarsolvent mixture. avoid to put used ink back in container (risk of air entrapment) [4] storage store the product between 5 °c and 25 °c, protect from freezing. [5] health and safety see separatematerial safety data sheet.

---

上海市顺盛化工贸易有限公司
杨集华
18601691797
上海市奉贤区浦星公路永南路3357-3359号