the mp-6000tx is a rf/ fiber optic transmitter designed for antenna remoting and broadband rf transmission applications using singlemode fiber optic cable. the transmitter uses a high efficiency distributed feedback (dfb) laser diode with an operating wavelength of 1550 nm that provides low noise and high dynamic range performance. the transmitter's temperature stability is controlled with the use of a temperature compensation network. the transmitter provides status monitoring through the use of an onboard processor that communicates with a host computer over an rs-232 i/o interface. the i/o parameters include laser bias current, temperature and alarm status. when the mp-6000tx rf/fiber optic transmitter is linked with the mp-6000rx 18 ghz rf/fiber optic receiver, the combination provides an excellent choice for your ultra-wideband rf to fiber optic conversion applications.
applications：
◆ultra-wideband rf transmission
◆antenna remoting
◆delay lines
◆c & x band satcom
◆radar, ew & ecm
◆ultra-wide bandwidth, 500 mhz to 18 ghz
◆high dynamic range
◆low noise
◆status monitoring: rs-232 (opt)
◆1 year full, 2 year limited warranty
optical parameters：
spec
value
operating wavelength
1550 nm +/- 5.0 nm
optical output level (min)
+5.0 dbm
e/o diff. eff. (min)
0.1 w/a
line width (3 db)
10 mhz
side mode supression (typ)
45.0 db
rf channel ：
spec
value
modulation bandwidth
500 mhz to 18 ghz
flatness (max)
+/- 1.0 db in any 500 mhz bandwidth
vswr (max)
2.0:1
1 db comp. level (min)
17.0 dbm(1)
input ip-3 (min)
26.0 dbm(1)
input damage level
20.0 dbm(1)
input backreflection
-35.0 db
rf link gain (min)
-5.0 db @ 1.0 db optical loss(1) @ 18 ghz
noise figure (max)
47.0 db @ 1.0 db optical loss(1) @ 18 ghz

---

上海基带通讯科技有限公司
樊经理
13601988193
上海市普陀区新村路1288弄35号901室