| 加工定制否 | 品牌Radiant |
| 型号Precision Multiferroic II | 适用范围薄膜和陶瓷材料 |
| 外置电压10Kv | 数模转换18位 |
| 波形输出16位 |
precision multiferroic ii是市面上进的铁电测试系统。具有独特的频率等级270khz在+ / - 100v的内置系统，实现对薄膜和块体陶瓷快速而简单的测试。
premier multiferroic ii无需改变测试样品的连接，即可实现滞回，脉冲，漏电，ic,iv的测试。配备额外的模块，可实现热释电性能、磁电特性、晶体管特性、低温性能、块体陶瓷和/或薄膜压电性能的测试。
precision multiferroic ii提供了多种内部放大器，±100v/200v/500v内置驱动电压的可供选择。可外置扩展10kv的高压接口和一个放大器。系统包括可视化数据采集和管理系统软件。
可实现的测试功能：
1.电滞回线测试；
2.记忆特性测试；
3.漏电流测试；
4.疲劳测试；
5.脉冲测试；
6.iv测试；
7.cv测试保持力测试；
8.印痕测试；
备注：另外还有压电测试、热释电测试、磁电测试需配合另外升级选件实现。
tester parameter
multiferroic ii
voltage range (built-in drive voltage)
±10v, ±30v, ±100v, ±200v or ±500v built-in
voltage range with an external amplifier and high voltage interface (hvi)
10kv
number of adc bits
18
minimum charge resolution
0.80fc
minimum area resolution (assuming 1 adc bit = 1μc/cm2)
0.080μ2
maximum charge resolution
5.26mc
maximum area resolution (assuming saturation polarization = 100μc/cm2)
52.6cm2
maximum charge resolution with high voltage interface (hvi)
526mc
maximum area resolution (assuming saturation polarization = 100μc/cm2) w/o hvi
>100cm2
maximum hysteresis frequency
270khz @ 10v
270khz @ 30v
270khz @ 100v
100khz @ 200v
5khz @ 500v
minimum hysteresis frequency
0.03hz
minimum pulse width
0.5μs
minimum pulse rise time (5v)
400ns
maximum pulse width
1s
maximum delay between pulses
40ks
internal clock
25ns
minimum leakage current (assuming max current integration period = 1 seconds)
1pa
maximum small signal cap frequency
1mhz
minimum small signal cap frequency
1hz
output rise time control
105 scaling
input capacitance
-6ff
electrometer input all test frequencies for all test at any speed
yes
* the minimum area resolution under actual test conditions depends upon the internal noise environment of the tester, the external noise environment, and the test jig parasitic capacitance.
*** tester specifications are subject to change without notice.
杭州雷迈科技有限公司
蒋新浩（info@dymate.com）先生
13336187598
浙江 杭州 萧山区 萧绍路1128号华蔚大厦11楼