本产品采用改性烷烃油为基础油，以最新的max-top®的导热油专用配方加入多种专用复合添加剂制造而成，其主要成分是烷芳烃混合物。
this product uses the modified alkane oil as the base oil and is made with the latest max-top ®heat transfer oil added with a variety of special composite additives. the major components are cycloalkanes mixtures.
该型导热油是公司最新的科研成果之一，其特点是烷烃基础油的成功改性。它具有优良的热稳定性、自清洁性，年结焦率小于0.1%，年酸值增加量小于0.05mgkoh/g，热传导率高，对系统无腐蚀，使用寿命长，其性能优于国内外同类产品，应用范围广。
this type of heat transfer oil is one of the latest research results of the company, which is characterized by the successful modification of alkane base oil. it has excellent heat stability and self-cleaning nature, and its annual coking rate is less than 0.1% and annual increase of acid value less than 0.05mgkoh/g. in addition, it also has high thermal conductivity, causes no corrosion for the system and has long service life. its performance is superior to domestic and foreign similar products and it has a wide scope of application.
典型数据
typical data
外观                      淡黄色透明液体             
appearance           light yellow transparent liquid
主要成分                改性烷烃油              
main component     modified alkane oil   
闪点                     195℃                 
flash point           195℃                 
自燃点                  350℃                  
spontaneous ignition point         350℃  
倾点                    -10℃                  
pour point            -10℃                  
酸值                    0.02 mgkoh/g          
acid value            0.02 mgkoh/g           
残炭                     0.03 %                 
carbon residue     0.03 %                 
水份                      88 ppm                 
moisture              88 ppm         
硫含量                  0.001 %           
sulfur content        0.001 %    
氯含量                  5 mg/kg           
chlorine content    5 mg/kg    
使用状态               液相                  
use status            liquid           
最低使用温度            -5℃                  
minimum use temperature      -5℃       
最高使用温度           310℃                 
maximum use temperature         310℃   
油心温度                 310℃                  
oil center temperature             310℃      
油膜温度               335℃                   
oil film temperature              335℃        
热稳定性试验        通过                    
heat stability test             passed        
温度℃
temperature
℃
密度kg/m3
density
kg / m3
粘度cst
viscosity
cst
热传导率w/m·k
thermal conductivity
w / m · k
（kg·k）specific heat capacity
比热容kj/
kj/(kg·k)
饱和蒸汽压
psi
saturated vapor pressure
psi
20
885
62.7
0.1337
1.800
0.00
40
851
27.5
0.1314
1.968
0.00
100
820
5.2
0.1279
2.177
0.00
200
754
1.0
0.1210
2.512
0.35
300
690
0.3
0.1140
2.889
3.58
320
677
0.2
0.1126
2.910
5.22

---

四川迈斯拓石油化工科技有限公司
胡建伟
13808019629
成都市双流县龙池工业区