油壓機械式機構，高穩定性
oil pressure mechanical structure
high stability
*確認拉力計規格是否與主軸夾爪的規格相對應。
* check the specification of pull force gauges should
  correspond the specification of spindle clamping unit.
*量測環境溫度需控制在室溫25±1℃內。
*measuring environment’s temperature should be controlled within 25 ± 1℃.
*將拉力計及主軸前端錐度部位擦拭乾淨後，夾持拉力計即可。
* clean the pull force gauges and front-end taper parts and then
  clamp the pull force gauge.
adjustment of hsk63a/e pull force gauge shown on the right.
2)為確保量測數值的正確性，拉力計須在有預拉的情況下使用。
  to ensure the accuracy of measurement the pull force;
 gauge has to be used in the pre-pull condition.
3)實測拉力：以指針所指外圈之數值x10，即為實測拉力(kg-f)
  the finger indicated the value of the outer ring x 10;

---

福州浩威诚商贸有限公司

13358203328
中国 福州