bz-300电动式液压钳充电式液压钳电动压线钳150mm2铜铝压接
bz-300电动式液压钳，压接头可以在纵轴进行350°的轻松旋转，使其可进入狭窄的角落工作
bz-300 battery crimpingtool for 16-300mm2 cables
for crimping 16,25,35,50,70,95,120,150,185,240,300mm2 lugs
技术参数:
出力 60kn
行程 17mm
压接次数 320times没饱和电压(铜线 150mm2)
压接一次的时间 3-6s(根据线缆的直径大小)
电池电压 18v
电池容量 3.0ah
充电时间 2小时
包装 plastic box
配件
模具: 16,25,35,50,70,95,120,150,185,240,300mm2
电池 2块
充电池 1个
油缸密封圈 1套
安全法密封圈 1套
technical parameters:
crimping force 60kn
stroke 17mm
crimp/charge 320times(cu 150mm2)
crimping cycle 3-6s(depend on the size of cable)
voltage 18v
capacity 3.0ah
charging time 2hours
package plastic box
accessories
crimping dies: 16,25,35,50,70,95,120,150,185,240,300mm2
battery 2pcs
charger 1pcs
sealing ring of cylinder 1set
sealing ring of safety valve 1set
型号:bz-300
电池压接工具16-300mm2
微型计算机控制系统--——在压接时自动检测压力，双重安全保护。
压力自动释放功能——在压力达到最大时，将停止工具冲压的动力并释放90%的压力
配备了一个双活塞泵，快速接触压接物后，在压接过程中自动提供更高的压力。
为了更好的进入狭窄的角落和其他困难的工作区域，压接头可在纵轴周围350°轻松旋转。
如果偏离了设定操作压力或电量过低被确认时，信号声将响起并伴随红色显示闪烁。
一键控制——按下开关按钮进行工作，松开一半的开关意味着停止压接的动力，完全松开开关意味着活塞恢复到最初的位置。
锂电池没有记忆效应也不自动放电，即使长时间没有运转，工具也随时可以运转。与镍氢电池相比锂电池具有更低地功率重量比，表现为多50%的电量和更短的充电周期。
当工具在超过60°的温度下长时间的工作时，一个温度传感器自动使工具停止工作并且故障信号会响起，这意味着工具无法正常工作直到温度恢复正常。
item no:bz-300
battery crimping tool 16-300mm2
micro computer control system-automatically detect the pressure when it is crimping, with doublesafety protect.
pressure released automatically function-the tool stop forcing the pressing and release 90%pressure when the pressure reached maximum.
the tool equipped with a double piston pump which characterized by a fast approach towards theconnecting material and transfer to high pressure automatically by slow crimping.
the crimping head can be smoothly turned by 350° around the longitudinal axis in order to gainbetter access to tight corners and other difficult working areas.
if a deviation from the set operation pressure or low battery charges is identified, an acousticsignal sounds and a red display flashes.
one key control-press the trigger to start working, half loosing the trigger means stop forcingpressure, loosing fully means piston return to the original position.
li-ion batteries do neither have a memory effect nor self discharge. even after long periods of nooperation, the tool is always ready to operate. in addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to nimh batteries.
a temperature sensor makes the tool stop working automatically when the temperature over 60℃ underlong time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
\';

---

乐清市威仕电气有限公司
王以志
13777739781
浙江乐清市柳市镇车站路198号鸿宝大厦8F