the mp-5000rx is a rf/fiber optic receiver designed for antenna remoting and ultra-broadband rf transmission applications using singlemode fiber optic cable. the receiver utilizes a high-speed, low distortion pin photodiode detector that provides optical to rf conversion out to 12 ghz. the unit provides the user with status monitoring through the use of an onboard processor that communicates to a host computer over an rs-232 i/o interface.
the i/o parameters include received optical power, temperature and alarm status. when the mp-5000rx 12ghz rf/fiber optic receiver is linked with the mp-5000tx 12 ghz rf/fiber optic transmitter, the combination provides an excellent choice for your ultra-wideband rf to fiber optic conversion applications.
applications：
◆ultra-wideband rf transmission
◆antenna remoting
◆satcom
◆radar, ew & ecm
◆frequency & timing distribution
◆telemetry
◆ultra-wideband, 1.0 mhz to 12 ghz
◆high dynamic range
◆status monitoring: rs-232 (opt)
◆1 year full, 2 year limited warranty
optical parameters：
spec
value
bandwidth
1.0 mhz to 12 ghz
operating wavelength
800 nm to 1650 nm
input level (max)
+5.0 dbm
responsivity (min)
0.70 a/w @ 1310 nm,0.75 a/w @ 1550 nm
ripple (flatness)
-0.5 db to 1.5 db
group delay (500 mhz to 3db)
+/- 7.0 ps
3 db bandwidth
18 ghz (min), 22 ghz (typ)
power dissipation (= vbd * ibd )
150 mw
dark current @25ºc, 5v
10 na (typ), 100 na (max)
optical return loss
-30.0 db (min) -35.0 db (typ)
wavelength responserange
800 nm (min), 1650 nm (max)
bias voltage @ +13dbm
+6v (typ)
cso @ +4dbm
-70.0 dbc
cto @ +4dbm
-75.0 dbc
input backreflection
-35.0 db
optical pdl @ 1550nm
0.06 db (typ), 0.12 db (max)
optical fault threshold
factory preset to -12.0 dbm

---

上海基带通讯科技有限公司
樊经理
13601988193
上海市普陀区新村路1288弄35号901室