can communication diagnosisdst-2 realizes more accurate diagnosis through can communication that speed is 50 times faster than conventional. easy operation on lcd display with touch panel5.7inch fullcolor display with touch panel assists an easier operation. voltmeter and oscilloscope not only communication basis disgnosis [diagnostic code, ecu data monitor, active test], but also voltmeter andoscilloscope detect alteration in the electric signal to find out the troubling part. data recording to your pcsaved data such as data-list can be downloaded to your pc. it-2 main unit itemsspecification dimensions 145mm (w) x 223mm (h) x 71mm (d) weight approx. 1380g source voltage dc10-32v power consumption normal:7w (12vdc), charging: 10w (12vdc) operation temperature 0~45c storagetemperature -10~60c lcd display 5.7-inch color stn (320x240), transparent type of 256 colors adjustable brigthness/contrast touch panel input: by finger or stylus pen key four (up, down, two functionkeys) built-in clock for a time stamp pc communication pc card slot cfx1ch (cf standard type i, ii) usb host: 1ch, function: 1ch serial 1ch (rs-232c) vehicle communication can, iso9141 back up powersupply lithium-ion battery 7.4v 1000mah recharge hour (at normal temperature) approximate operating time approx 5 hours (fully discharge to full charge) 80 minutes (normal operation) voltagemeasurement function items specification maximum sampling rate 250s/sec input channel 1ch voltage range (vertical scale) 1v/div, 2v/div, 5v/div time range (horizontal scale) 100ms/div, 200ms/div,10s/div oscilloscope function items specification maximum sampling rate 500ks/sec input channel 2ch trigger functions mode auto, normal, single trigger 10%, 50%, and 90% of the monitor voltage range(vertical scale) 100mv/div, 200mv/div, 500mv/div~10v/div time range (horizontal scale) 5us/div, 100us/div, 200us/div,~10s/div (200ms and higher is the roll mode

---

深圳市恩得福电子科技有限公司

13728859336
深圳宝安区龙华镇梅龙大道梅龙苑2U 2401室