产品用途丨product applications
该设备是通过软件控制，使用激光非接触方式检测铣刀。适用于检测圆棒相关参数的高精度检测设备.
this equipment is controlled by the software, check the milling cutter by using laser non-contact way. it’s a high precision testing equipment , and it’s applicable to check the related parameters ofround bar.
产品特性丨product features
●高分辨率：重复检测精度±0.002mm。●high resolution: repeat accuracy ± 0.002 mm.●操作简单：一键测量，只需一个按键即可完成所有测量.●simple operation: a key measure, it can complete all the measurements just need a button●高效率：完成一次测量只需十几秒。●high efficiency:to complete a measurement only need 10 seconds.●成本低：超低耗材费用，用完全符合rohs的耗材为公司节约成本。●lowcost: consumable cost is ultralow, satisfactory rohs consumable cost assist in saving the cost for the company.●适用产品：成品铣刀，钻头，半成品棒料等。●applicable products: finished milling cutter, drill, semi-finished bar, etc.
应用实例丨application cases
技术参数丨technical parameter
项目item规格specificaiton
直径测量范围
diameter measurement range 0.6-25mm
长度测量范围
length measurement range 50-200mm
测量参数 1
measured parameters 1 成品直径，跳动
finished prodect diameter, bounce
测量参数2
measured parameters 2 圆棒直径，跳动，圆度
round bar diameter, bounce, circular degree
外观尺寸
shape size 800*700*1100mm
重量
weight 100kg
操作界面
operating interface 中文
chinese
操作系统
operating system windows xp
电源供给
power supply 220vac/1phase/50~60hz/5a
操作环境
operating environment 温度(temperature)： 0~35℃
湿度（humidity）：30-70% relative humidity
\';

---

东莞市鼎泰机器人科技有限公司
史元林
13712229965
广东东莞市厚街镇赤岭工业区一横南路12号