产品简介
根据jjg313-94《测量用电流互感器》，jjg313-93《测量用电压互感器》要求互感器交接时和更换绕组后必须进行现场变比检查试验。
常规互感器变比的检查方法是电流法，从原理上讲是一种容易理解可行的检查方法，但是随着系统容量的增加，电流互感器的一次电流越来越大，最大可达数万安培;现场加电流至数百安培已有困难，数千安培或数万安培几乎不可能，况且体积庞大，重量重达几百公斤或几吨，现场使用更为困难，如采用小电流法，由于电流互感器磁感度、线性度、阻抗、漏抗的影响会使电流互感器误差骤增，失去了变比检查的意义。
体积小、重量轻、测量范围广、便于携带，适于现场使用的电流互感器变比测试仪越来越成为互感器测试工作的必备手段。nabz 互感器变比极性测试仪就是南澳电气公司总结国内外互感器特性,运用目前最新研究理论及成果，结合现场使用的要求研制而成的。
产品别名
ct变比极性在线检测仪，高压互感器变比测试仪、高压ct变比测试仪、高低压ct变比测试仪、高低压互感器变比测试仪、带电测量高压ct变比测试仪，高压ct变比测试仪
产品特性
1、首家采用电压测量法，体积小重量轻，便携式,满足现场工作轻便性要求。
2、电压波形由单片机程序产生，干净纯正，免除了电网干扰。
3、内部采用恒压源，读数稳定。
4、适用于从几十安培至几万安培的所有电流互感器。所有电磁式电压互感器。
5、能直接显示变比值。
6、电子法测量互感器极性，简单直观。
产品参数
项    目
参    数
工作电源输入
ac220v/50hz
变比测量范围
5a/5a------25000a/5a
5a/1a-------5000a/1a
电磁式电压互感器全系列
测量精度
0.2%
体    积
280mm*220mm*120mm
重    量
2kg
product introduction
differ from the traditional structure, specially for measuring high and low voltage secondary circuit of a current,variableratio, relative toother, polarity, leakage current and well-designed. using the latest ct technology and mask figures integration technology. by a dedicated high voltage detector, lowcurrent clamp,the host, highvoltage insulation rod, monitoring software and other components, and its wireless transmission of test data can penetrate obstacles to multi-storey buildings, lineartransmissiondistance up to 30meters. if you do not use insulated rod, but also can be used as high-precision voltage clamp meter, leakage current meter can accurately measure 0.00ma ~ 1000a currentor leakagecurrent.
also called name
ct ratio polarity line detector, high voltage transformer ratio tester, high voltage ct ratio tester, high voltage ct ratiotester,high voltagetransformer ratio tester, live measurement of high voltage ct ratio tester, high ct ratio tester
the characteristics of the products
1.current clamp is made of special alloys , using the latest ct technology and magnetic shielding technology , not affected byexternalmagnetic field,to ensure uninterrupted year-round monitoring of high-precision, high stability, high reliability.
2.more clearly with blue lcd display and large storage space, can store 3000 groups of data .
3.monitoring software with an online real-time monitoring and historical inquiry , dynamic display, waveform indication ,ratio,frequency indication ,with the maximum, minimum , average indication with alarm settings and alarm indicator, historical data read , inspection , preservation, analysis, processing , sorting,curvefitting , reports,printing and other functions .
4.high-pressure detector connected to the insulating rod can be used for the following 60kv high voltage line current measurementsonboth sides of thecurrent transformer size , ratio test , on-line current monitoring , and its special high-voltage current clamp by pushing or pulling back or insulating rod can easilyclampevacuation measured wire ,time-saving shortcuts , widely used in substations and industrial and mining enterprises ﹑power plants , inspection station, electricalmaintenancedepartment for current sensing , electricalinspectors , field operations, such as electricians . lightweight insulating rod with a moisture- impact , bending resistance, high temperatureresistance,high insulation , easy check data, so on.
the parameters of the products
function
high and low voltage secondary circuit of a current ratio, polarity , phase types, leakage current online monitoring ;transformersidesthe current size , ratio -line monitoring
power source
 dc6v alkaline batteries (1.5v aaa × 4) approximately 30 hours of continuous work
test methods
clamp ct
transmission
wireless transmission, transmission distance of about 30m straight line
display mode
lcd: 128dots × 64dots; blue backlight function , suitable for dark places
lcd size
display field : 44mm × 27mm
meter size
host : width height thickness 75mm × 170mm × 30mm
voltage tester : width height thickness 76mm × 255mm × 31mm
low current clamp : width height thickness 63mm × 160mm × 23mm
jaw size
 voltage tester : φ48mm
low current clamp : φ30mm
sampling rate
2 times / sec
measuring range
high voltage detector : 0.0ma ~ 1000a
low current clamp : 0.00ma ~ 10a
resolution
high voltage detector : 0.1ma; low current clamp : 0.01ma
gearshift
automatic gearshift
primary circuit test accuracy
23 ℃ ± 3 ℃, below 80% rh
0.0ma～10.0a:       ±1%±5dgt
10.0a～49.9a:      ±2%±5dgt
50.0a～199.9a:     ±3%±5dgt
200a～600a:        ±4%±5dgt
601a～1000a:       ±5%±5dgt
secondary circuit test accuracy
23 ℃ ± 3 ℃, below 80% rh
0.00～10a:  ±1%±5dgt
ratio
three kinds of variables than the display : ( a secondary circuit measured current ratio ; commuted to the secondary circuit 5a ratio;tothe 10kv-yy transformer 10kv/380v commuted ratio ) , the maximum ratio of 1:1 ten million ( 1.0k7)
data storage
3000 groups , press the hold key to keep the data and numbered storage automatically (not affact by replace the battery orasuddenbrownout)
line voltage
the following 60kv line test ( must be insulated with 5 lever operation )
data hold
press hold to hold the data , hold symbol is displayed , press the hold button to cancel maintained
data checking
press hold + power key to enter the data recall mode
overflow show
overrange overflow function : ol a symbol is displayed
no signal indication
when the host transmits a signal is not received prompt no signal
automatic shutdown
about 15 minutes after the start , the meter will automatically shut down
battery voltage
when the battery voltage is lower than 4.8v, low battery symbol appears , replace the battery alert
instrumentation quality
host : 240g ( with battery )
high voltage detector : 335g ( with battery )
low current clamp : 170g
instrumenttotal mass : 2.8kg ( including insulation rod and battery )
outside interference
no particularly strong electromagnetic fields ; without 433mhz, 315 mhz co-channel interference
working temperature and humidity
-25℃～45℃；below 80%rh
storage temperature and humidity
-10℃～60℃；below 70%rh
insulating rod dimensions
φ32mm, 1m / section ( 5 standard ) , can be extended .
low current clamp wire length
 standard 2 m ( distance can be lengthened according to the site )
dielectric strength
high voltage detector : ac100kv/rms ( section 5 insulating rod with high current clamp clamp core )
host and low-voltage current clamp : ac1000v/rms
structure
drip ⅱ type ( high voltage detector )
safety rules
iec1010-1, iec1010-2-032, pollution degree 2, cat ⅲ (600v),iec61326(emc standard )
accessories
clamp : 1 ; receiver: 1 ; current clamp : 1 ; disc : 1 ; rs232 communication cable : 1 ; meter box : 1 ; insulating rod ( 1 m ) :5;batteries (lr03) : 8

---

南澳电气（武汉）有限公司
刘永强
15327206266
东湖高新技术开发区关山大道