品牌湖南精正设备制造有限公司	型号家具发泡机
类型聚氨酯发泡机	发泡原理高速叶轮型
售后服务服务及时一年	产品别名家具型聚氨酯低压发泡机
产品用途生产聚氨酯家具用品	规格按客户要求订做

出口家具用聚氨酯低压发泡机 furniture pu foaming machine
聚氨酯低压发泡机广泛应用于多模式连续生产硬质半硬质聚氨酯制品，如：石油化工设备、直埋管道、冷库、水箱、仪表等保温绝热和隔音设备工艺制品。
产品特点：
1、浇注机的浇注量可以在0至浇注量之间调节，调节精度为1%。
2、本产品具有温度控制系统，达到指定温度时可自动停止加热，其控制精度可达1%。
3、本机具有溶剂清洗和水、空气吹扫系统。
4、本机具有自动加料装置，可随时任意加料。a、b料桶均可装120公斤料液。料桶设有水夹套，利用水温来加热或制冷料液，各桶有水视管和料视管。
5、本机采用截门调节a、b料液比例，比例精度可达1%。
6、客户自备一台空压机，压力调节到0.8-0.9mpa即可使用本设备生产。
7、时间控制系统，本机的控制时间可在0-99.9秒之间设定，精度可达1%。
low pressure polyuerthane foaming machine is widely used in continuous production of multi-mode rigid semi-rigid polyurethane products, such as: petrochemical equipment, buried pipes, cold storage, water tanks, meters and other thermal insulation and sound insulation equipment technology products.
features:
1, pouring machine pouring capacity can be adjusted between 0 to the maximum pouring volume, adjust the accuracy of 1%.
2, the product has a temperature control system, to the specified temperature can automatically stop heating, the control accuracy of up to 1%.
3, the machine has a solvent cleaning and water, air purge system.
4, the machine has automatic feeding device, can be any time feeding. a, b bucket can hold 120 kilograms of liquid. the barrel has a water jacket, the use of water temperature to heat or refrigerant liquid, each barrel has a water tube and material tube.
5, the machine adopts cut-off adjustment a, b material ratio, the proportion of accuracy up to 1%.
6, a customer-owned air compressor, pressure regulation to 0.8-0.9mpa can use the equipment production.
7, time control system, the machine&＃39;s control time can be set between 0-99.9 seconds, the accuracy of up to 1%.

---

湖南精正设备制造有限公司
盛先生
15367112357
湖南 湘潭 雨湖区 南岭