加工定制是 | 品牌P+F/倍加福 |
型号CCB10-30GS55-N1 | 种类光电 |
制作工艺集成 | 输出信号数字型 |
材料聚合物 | 材料物理性质磁性材料 |
材料晶体结构多晶 | 防护等级IP67 |
线性度64%F.S. | 迟滞35%F.S. |
重复性68%F.S. | 灵敏度72 |
漂移38 | 分辨率48 |
最小包装数1 | 订货号65412 |
物料编号64121 |
ccb10-30gs55-n1
10 mm flush
the switching distance can be set over a wide range with the potentiometer
namur sensors must be operated with approved switch amplifiers. please find suitable devices below:
general specifications
switching function normally open (no)
output type namur
rated operating distance 10 mm
installation flush
nominal ratings
installation conditions
a 0 mm
b 0 mm
c 20 mm
f 60 mm
nominal voltage 8.2 v (ri approx. 1 kω)
operating voltage 5 ... 15 v
switching frequency 0 ... 50 hz
reverse polarity protection reverse polarity protected
current consumption
measuring plate not detected ≤ 1.5 ma
measuring plate detected ≥ 2.5 ma
switching state indicator led, yellow
compliance with standards and directives
standard conformity
namur en 60947-5-6:2000
iec 60947-5-6:1999
approvals and certificates
etl approval cetlus
ccc approval ccc approval / marking not required for products rated ≤36 v
ambient conditions
ambient temperature -20 ... 70 °c (-4 ... 158 °f)
mechanical specifications
connection type cable pur , 2 m
core cross-section 0.75 mm2
housing material stainless steel 1.4305 / aisi 303
sensing face ptfe
housing diameter 30 mm
degree of protection ip67
general information
use in the hazardous area see instruction manuals
category 1g; 1d
上海阔隆自动化科技有限公司
曹女士
18121004705
上海 上海 浦东新区 东靖路2250弄13号301室