厂家(产地)爱彼斯	牌号TPV D50NU
销售方式品牌经销	类型标准料
加工级别注塑级、 包覆	特性级别增韧级、 耐候、 高强度、 高流动、 高光泽、 高刚性
用途级别填充级、 家电部件、 电动工具配件	品牌TPV D50NU

tpv d50nu
tpv drying: dry treatment is not required if the storage is appropriate.
melting temperature: the melting point of pp is 160-175 c, the decomposition temperature is 350 c, but the temperature setting can not exceed 275 c during the injection processing. the temperature of the melting section is best at 240.
mold temperature: the mold temperature is 50-90 degrees c, for the high requirement of the size of the high mold temperature, the core temperature is lower than 5 degrees centigrade.
injection pressure: high injection pressure (1500-1800bar) and pressure holding pressure (about 80% of the injection pressure). at about 95% of the full stroke, the reinsurance pressure is used, and the longer holding time is used.
injection speed: in order to reduce internal stress and deformation, high speed injection should be chosen, but some grades of pp and die are not applicable (bubbles and air lines). low velocity injection and higher mold temperature should be used if the surface of the pattern has a bright and dark fringe that is spread by the gate.

---

东莞市丽德塑料有限公司
邓女士
13537194875
广东 东莞 樟木头镇