the bizarre v2 has infinitely adjustable softness (give), to be controlled by the control screw on the top of the machine, it can be controlled by your fingers or by a hex (allen) key.
why being limited when you can get so much more? soft or hard hitting or anywhere between, short , medium or long stroke all with the same machine!
for harder hitting (lining or color packing), turn the control screw clockwise. for softer hitting (shading), turn the control screw counterclockwise.
this machine is capable of hitting very softly compared to the best conventional coil shading machines.
this machine can be adjusted on the fly, you only need 5 seconds to turn it from a liner to a shader without the need of touching the power supply.
the bizarre v2 can be set up to hit at short, medium, or long strokes by simply changing the interchangeable excenters in the front of the motor. it is capable of hitting at any stroke length from 2,6 mm up to 5,5 mm to suit your needs, for maximum efficiency and for the shortest healing times.
the bizarre v2 comes with a medium stroke excenter pre-installed which causes minimum 3,5 mm stroke and maximum 4,4 mm stroke.
optionally, we offer shorter and longer stroke excenters, the short stroke version causes minimum 2,6 mm stroke and maximum 3,4 mm stroke.
the long stroke version causes minimum 4,4 mm stroke and maximum 5,5 mm stroke.
the bizarre v2 has a new precision adjustable needlebar stabilizing system which allows us to operate the machine without rubberbands, just add the exact amount of pressure against the needlebar and get a perfect stabilazed needle.
the bizarre v2 now has a new concept, a new round external piston causes minimal friction on the drive system, the motor and the engine is running more freely and cooler.
the bizarre v2 has a powerful 4,5 watt motor (swiss-made) by maxon motor, drives up to 50 needles or more without problems.
improved tube vice locking system for the grips.
adjust the speed by the power supply to 3.000 ~ 10.000 stitches per minute 7-12 volt.
new frame design very ergonomic and well balanced, it is perfectly cnc-machined from a solid block of aircraft aluminum and then anodized.
designed for use with standard needles, tubes, grips, and power supplies.
weighs only 110 grams (3.8 oz).
linear armature motion.
low vibration, low noise, easy handling and flexibility, no tuning, no trouble.
rca jack and clipcord connections are both on the machine.
patented machine copying or duplicating is not allowed.
the bizarre v2, the hyper v2, and the fly are infinitely adjustable (no grades) for give and stroke rotary machines more user-friendly than coil machines.

---

飞龙纹身器材有限公司
曹志敏
13616791659
浙江省义乌市佛堂镇稠佛路188号