'   skt13e(el)数控（大通孔）立卧回转工作台是各类数控镗、铣床和加工中心的重要附件。可分别以立式和水平式两种方式安装于主机工作台上。工作时，利用主机的控制系统或专门的控制 系统，完成于主机相协调和各种必须的分度回转运动。工作台上除了可安装板、盘或其他形状较复杂的被加工零部件外，也可以利用主轴内大直径贯穿通孔安装气（液）动弹簧夹头或动力卡盘，对长轴类零部件进行加工，实现等分、不等分的连续的孔槽、曲面的加工，且达到较高的精度。
     skt13e（el） nc rotary table with through hole in the spindle center is suitable for either horizontal or vertical position,it is a perfect accessory for nc miller and machine center.used in combination with the control of nc machine tool or an independent control for non-nc machine tool,continuous cutting work for board type,disk type,hole plate as well as other parts fixde between table and tailstock can be carried out precisely,especially with the through hole in the spindle center,hgdraulic(pneumatic)actuating coolect and chuck can be used to proceed long shaft type parts.
'

---

烟台华大数控机床附件有限公司
赵庆富
15954997688
③浙江省宁波市环城北路东段79号－704室