| 加工定制是 | 品牌BECKHOFF |
| 型号EL3742 | 工作电压24V |
| 输出频率50kHz | 产品认证CE |
特价现货，一手货源 质量保证 价格优势 德国制造 品质保证 库存充足 全新现货 倍福全系列 优质服务提供技术支持
欢迎新老客户朋友询价选购下单部分图片可能与实物不同为图片选择错误所致，欢迎来电来函咨询
联系 15988242149
el3742 | 2-channel analog input terminal 0…20 ma, differential input, with oversampling
the el3742 analog input terminal handles signals in the range between 0 and 20 ma. the voltage is digitised to a resolution of 16 bits, and is transmitted, electrically isolated, to the controller. the input channels of the ethercat terminal have differential inputs and possess a common, internal ground potential. the signals are oversampled with an adjustable, integer multiple (oversampling factor: n) of the bus cycle time (n microcycles per bus cycle). for each microcycle, the ethercat terminal generates a process data block that is collected and transferred during the next bus cycle. the time base of the terminal can be synchronised precisely with other ethercat devices via distributed clocks. this procedure enables the temporal resolution of the analog input signals to be increased to n times the bus cycle time. in conjunction with the el47xx (analog output terminal with oversampling), responses with equidistant time intervals, e.g. in the event of a threshold value being exceeded, become possible. the distributed clocks function enables several el3742 devices to be synchronised in almost any configuration. the maximum sampling rate per channel is 100 ksamples/s (100,000 samples/s).
technical datael3742 | es3742
number of inputs 2 (differential)
power supply via the e-bus
technology differential input, oversampling
signal current 0…20 ma
oversampling factor n = 1…100 selectable
distributed clocks yes
distributed clock precision <<1 ?s
internal resistance 85 ω typ. + diode voltage
input filter limit frequency 80 khz
common-mode voltage ucm 10 v max.
conversion time min. 10 ?s
input signal bandwidth 0…30 khz recommended
resolution 16 bit (incl. sign)
measuring error <±0.3 % (relative to full scale value) up to 10 hz input signal
surge voltage resistance 35 v max.
electrical isolation 500 v (e-bus/signal voltage)
current consumption power contacts –
current consumption e-bus typ. 200 ma
bit width in the process image input: n x 2 x 16 bit data; optionally 2 x 16 bit cycle counter, 4 byte startnextlatch time
special features oversampling
weight approx. 60 g
operating/storage temperature -25…+60 °c/-40…+85 °c
relative humidity 95 %, no condensation
vibration/shock resistance conforms to en 60068-2-6/en 60068-2-27
emc immunity/emission conforms to en 61000-6-2/en 61000-6-4
protect. class/installation pos. ip 20/variable
pluggable wiring for all esxxxx terminals
approvals ce, ul, ex
伺服驱动器的技术规格输入电源 ac220v -15%～+10% 2x50a ≤3.7kw 50/60hz 驱动电流 2x20a 适配电机 ≤1.2kw 输入电源 三相或单相 ac220v 使用温度 工作：45℃ 2x30a ≤2.3kw -15%～+10%存贮：-40℃～55℃相对湿度 40%~80%无结露 大气压 86-106kpa ①位置控制 ②jog 控制 ③速度控制 控制方式 ④位置和速度控制 ⑤内部脉冲控制 脉冲指令 ①脉冲+方向 ②cw+ccw 脉冲 ③两相 ab 正交脉冲 控制精度 0.01% 响应频率 ≤200hz 脉冲频率 ≤500khz 调速比 1：5000 再生制动 内置 电子齿轮 1/30000～30000/1 过载能力 ≥300% 反馈脉冲 2500p/r 电机转速、电机电流、电机转矩、电机位置、位置偏差、 显示功能 指令脉冲数、脉冲频率、直线速度、输入输出诊断 超速、过流、过压、欠压、过载、超差、编码器故障、温 保护功能 度过高、内部芯片故障、模块故障5 第二章 安 装? ? ? ? ? ?产品的储存和安装必须满足环境条件要求 产品的安装需要防火材料，不得安装在易燃物上面或附近，防止火灾 伺服驱动器须安装在电气控制柜内，防止尘埃、腐蚀性气体、导电物体、 液体及易燃物侵入 伺服驱动器和伺服电机应避免振动，禁止承受冲击 伺服驱动器的使用环境必须考虑避雷设施的安装 严禁拖拽伺服电机线、电机轴和编码器
上海勇控自动化设备有限公司
曾先生
15988242149
上海 上海 青浦区 上海宝山工业园区