电动液压登车桥是与叉车配合使用的装卸货设备，它可以根据货车高度调节角度，西朗电动液压登车桥可达到的爬坡高度是15度，理想使用情况下是8-10度，在这个角度下工作是较为理想的。电动液压登车桥另外根据不同叉车类型，我们的台面高度还可以进行微调。
西朗电动液压登车桥部件组成：
1.搭接板：搭接板为厚度为16mm，材料很坚固耐磨，不会产生应力开裂的问题。
2.主板面骨架：根据板面宽度，由8-12根c型钢加强，保证了花纹板面的牢固度和抗扭性。还可以选择“工”字型。
3.维修支撑杆：安全维修支撑杆可在清洁和检修期间保护维修人员安全。
4.液压缸：采用主升油缸（主面板升降）与辅助油缸（搭板翻转）设计，液压管路简洁。
5.安全控制阀：主油缸回路自动闭锁系统，发生意外时，由系统自动闭锁回路，面板停止下降。
6.液压泵站：100%原装进口液压泵站，密封性强，运行稳定。
西朗固定式电动液压登车桥全液压驱动，操作方便运行可靠。唇板与平台采用整长轴连接，强度高、可靠性好。采用进口密封件，保障液压系统具有优良的密封性能。采用进口整体模块式液压站，密封性好，使用寿命长。高强度“u”形梁设计能保障其高负载长时间运行不变形。电动液压登车桥采用防滑花纹钢板，使平台有良好的防滑性能。两侧设防轧脚裙板，防止脚趾伸入平台造成意外伤害。设有保障维护人员进入登车桥内部维护时安全的支撑杆。
产品英文详情介绍
electro-hydraulic dock leveler is used in conjunction with the truck cargo handling device, which can adjust the angle in accordance with the height of trucks, xilang electrohydraulic dock leveler ramp height can be achieved is 15 degrees, the ideal situation is the use of 8-10 degrees, work under this angle is ideal. electro-hydraulic dock leveler in addition, depending on the type of truck, our table height can be fine-tuned. xilang electrohydraulic dock leveler components: 1. lap plate: lap plate thickness of 16mm, the material is extremely resistant, no problem of stress cracking. 2. board skeleton surface: the surface of the plate width, is reinforced by 8-12 c steel, guarantees the solidity and torsion resistance diamond plate surface. you can also select the i shape. 3. maintenance support bar: security service support bar to protect personnel safety during maintenance cleaning and maintenance. 4. cylinder: using a main lifting cylinder (lifting the main panel) and the auxiliary cylinder (slab flip) design, simple hydraulic lines. the safety valve: the master cylinder circuit for an automatic locking system, when an accident occurs, the system automatically locked loop, the panel stops decreasing. 6. pump station: 100% imported hydraulic pump station, sealing strong, stable operation. xilang stationary electric hydraulic dock lever is fully hydraulic, easy to operate and reliable operation. lip and the entire platform is connected to the major axis, high strength, good reliability. imported seal, to protect the hydraulic system has an excellent sealing performance. with the overall imports of modular hydraulic station, good sealing and long service life. high strength u shaped beam which is designed to protect long-running high load without deformation. electro-hydraulic dock leveler non-slip tread plate, so that the platform has good slip properties. both sides fortification rolling pin apron to prevent accidental injury toes extend into the platform. with a guarantee for safeguarding the safety of personnel during maintenance support rod into the interior of the dock leveler.

---

非瑞普（苏州）智能设备有限公司
18662659657