this module provides a lot of functionality in a small package.with both rough and high vacuum sensors, integrated electronics,and built-in digital display, all that is required for basicoperation is that it be provided with dc power of suitable voltage,current capacity, and quality (requirements are in the manual,available on-line; see comments later in this description).
many of the common operations - including ionization gauge on/offand degas, conductron calibration, and configuration of set points- may be carried out through the local user interface of pushbuttons and led display. for partial remote control, some commonoperations can also be carried out through use of simple electricalinputs; trip point relays and analog output are available forsystem control and remote reading/logging of the pressure. thers-485 interface is available for comprehensive operation of thewhole package.
a data sheet for this module is available in .pdf format from thebrooks automation web site, on their literature page asgranville-phillips series 356 micro-ionplus module. the fullmanual is also available from them in .pdf format, undersupport-->literature library-->manuals-->module manuals,356 micro-ion plus vacuum gauge module with analog rs-485interface installation operation (356007). should you beinterested in looking at either or both of these, and have anydifficulty locating the files, then please contact us. we'd behappy to help.
granville-phillips part number 356001-ye-tmicro-ion bayard-alpert hot filament ionization gaugeconductron thermal-loss sensormeasurement range for nitrogen or air: 1x10-9torr toatmospherenw25kfno digital displayanalog outputtwo (2) trip point relaysrs-485 interface

---

上海伟务低温真空设备有限公司
曾超
13301865030
上海浦东张江蔡伦路150号3号楼202室