产品介绍德国 达威力 数显扭矩扳手 730d
manoskop® 730d
electromechanical torque wrench
beneits at a glance:
1   cut-out and indicating
1   displays the torque actually applied after the wrench cutsout. in this way, the user has t
opportunity to optimise his or her working methods.
1   units of measurement: n m / ft.lb / in.lb
1   automatic keypad lock 
1   display also works for anticlockwise torque
1   angle-controlled measurement without a reference arm usinga supplementary module 
1   overload protection by means of acoustic and visualsignals
1   automatic compensation to achieve correct tighteningtorque even if a changed extensio
entered
1   different tolerance limits can be set for each joint
1   visual red and green signals in the display conirm thestatus of the joint
1   additional security for presets using pin code
1   automatic notiication of the next calibration date
1   deviation of indication ± 2%
measure, cut-out and record: when the preset torque is reached, thetorque wrench cuts ou
and indicates this fact to the user via a deinite tactile andaudible signal. the tightening 
torques are stored. the data can be transferred to a pc forevaluation and documentation.
1、the square drive enables abroad range of insert tools
2、dual stop signal with tactileand acoustic cut-out signals
3、easy-to-read display
4、rapidsetting
     the convenient keypad enables the torque wrenchto be quickly and easily set
5、power supply two 1.5 v aabatteries
6、anglecontrolled tightening
     simply attach the angle module no 7395-1and connect the cable to the interface
7、data output usb interface
8、2-componenthandle has ergonomically designed, green softer layers andis 
     resistant to oils,grease, fuels, brake luids and skydrol.
9、quickrelease safety lock

---

深圳市贝维尔科技有限公司
周先生
15986793543