ggb model 7
产品介绍：
picoprobe® model 7 was designed as a companion probe to models 12cand 18c for driving integrated circuit lines so the model 12c and 18c can be used to measure the response of adjacent nodes. the model 7 consists of a flexible 6 foot, 50 ohm coaxial cable accuratelyterminated to 50 ohms in order to avoid undesirable reflections. a special miniature connector receives replacement coaxial probe tips that provide a shielded environment to within 3 mm of the finetungsten probe point, thus minimizing capacitive coupling to other parts of the circuit. the replaceable coaxial probe tips are offered in various point sizes and can also be bent to any shape inorder to accommodate a variety of probing geometries. 
替换探针型号如下：
model 7 and model 7a replacement tips
part
numbertungsten probing wire
shaft diameterpoint radius
7-55 micron<0.1 micron
7-1010 micron<0.1 micron
7-2222 micron<1.0 micron
7-3535 micron<2.0 micron
7-6060 micron<3.0 micron
7-125125 micron<5.0 micron
7-175175 micron<5.0 micron

---

深圳市森东宝科技有限公司
肖体春
13410490315
留仙洞工业区关外北区综合楼A栋2楼