the equipment is equipment with touchscreen and plccentralized control, a computerized automatic gear-shifting vacuumgauge, a three-flow controller, a set of contravariant blas powerand four-circuit contravariant arc power, 4 side-installed heatingtubes, and a pidtemperature control device. it becomes a keyequipment in the decoration industry widely used for platingvarious materials, such as tin,tic,zrn,crn,ti,ni,cr,cu,au,and agetc.
used to process the surface of lock, watch part,hinge andhardware etc.
ion coating gold equipment main model andparameters
parameters type 700 type 800 type 900 type 1000 type
dimension of vacuum chamber 700×1000 800×1000 900×1000 1000×1000
pumping speed 1×105pa~3×10-3pa≤20min
limit vacuum ≤1×10-3pa
system form a complete set kt-400/2x-70
2x-15 kt-500/2x-70
2x-15 kt-500/2x-70
2x-15 kt-600/2x-70
2x-15/zld-600
workpiece system rotation of the planet forms(8 roatingshaft, since the amount)
heating methods edge installation of stainless steelheating tube
ion bombardment direct current 1000v or contravariantimpulse 1000v high voltage bombardment
vent system mass flow controller control inputgas
arc target amount 4 4 6 8
magnetron target amount one plane target one plane target one plane target one plane target
working methods plc semi-auto control or pc+plc autocontrol
working gas arn2 o2
total power 30kw 35kw 45kw 50kw
compress air 0.4~0.8mpa
water-cooling system hydraulic pressure/watertemperature:≤25°c/≥0.25mpa(user provide for himself)

---

龙口市比特真空技术有限公司
王艳
15098573886
北马大街一号